Interior windbreaks Mercedes Atego/Axor
62,70 € excluding VATInterior windbreaks Mercedes Atego/Axor
Internal wind deflectors for Mercedes Atego/Axor, made of acrylic in light smoked tint. They allow cab ventilation with the window partly open, reducing noise and rain ingress.
Features
- Type: In-channel wind deflector
- Side: Driver – passenger side set (2 pieces)
- Material: Acrylic, light smoked
- Place: With tape or adhesive
Tinted Windshields Mercedes Atego 1998–2010 / Axor 2004–
59,57 € excluding VATMercedes Atego/Axor external windbreaks
External wind deflectors for Mercedes Atego/Axor, made of dark smoked acrylic. They allow cab ventilation with the window partly open, reducing noise and rain ingress.
Features
- Type: Externally mounted wind deflector
- Side: Driver – passenger side set (2 pieces)
- Material: Acrylic, dark smoked
- Place: No tools, with double-sided tape
Stainless Steel Front Grille Trims Mercedes Atego 2
59,79 € excluding VATStainless Steel Front Grille Trims Mercedes Atego 2
Stainless steel trims for the Mercedes Atego 2 front grille, highlighting the louvres and upgrading the look of the cab.
Features
- Type: Grille trims (upper and lower)
- Place: Pressed, with double-sided adhesive tape
Stainless Steel Door Trims Mercedes Atego 2
27,59 € excluding VATStainless Steel Door Trims Mercedes Atego 2
Stainless steel door trims for Mercedes Atego 2, highlighting the door line on the side of the cab.
Features
- Type: Door trims, 2 sections per side
- Side: Set (Left + Right)
- Place: Pressed, with double-sided adhesive tape
Stainless Steel Door Handles Mercedes Atego 1 / 2
27,87 € excluding VATStainless Steel Door Handles Mercedes Atego 1 / 2 (Set of 2 Pieces)
The stainless steel door handles are a decorative and protective accessory for Mercedes-Benz Atego 1 and Atego 2 trucks. They are placed over the factory handles, covering their surface.
Features:
- Type: Door handle covers
- Material: Stainless steel (inox)
- Set: 2 pieces
- Color: Silver (stainless steel)
- Installation location: Cabin door handles
- Situation: New – Aftermarket
Stainless steel short roof bar Atego 1/2
347,39 € excluding VATStainless steel short roof bar Atego 1/2
Upgrade the look and usability of your Atego 1/2 with a bar designed for professionals. Clean lines, proper fit and fully prepared for additional lighting.
Features:
- Diameter Ø60mm for a balance of appearance and durability.
- Material: Premium Stainless Steel
- Complete support kit with 4 bases for spotlights, beacons or LED bars.
- Lighting compatibility: Suitable for all types (round, square, LED bars)
- Electrical connection: Wiring is carried out by the vehicle electrician
Stainless steel roof bar long Atego 1/2
307,29 € excluding VATStainless steel roof bar long Atego 1/2
Upgrade the look and usability of your Atego 1/2 with a bar designed for professionals. Clean lines, proper fit and fully prepared for additional lighting.
Features:
- Diameter Ø60mm for a balance of appearance and durability.
- Material: Premium Stainless Steel
- Complete support kit with 4 bases for spotlights, beacons or LED bars.
- Lighting compatibility: Suitable for all types (round, square, LED bars)
- Electrical connection: Wiring is carried out by the vehicle electrician
Stainless Steel Bumper Bar Mercedes Atego 1/2
288,69 € excluding VATStainless Steel Bumper Bar Mercedes Atego 1/2
Stainless steel stainless steel bull bar for Mercedes Atego 1 & 2. Made of Inox, with a glossy mirror finish, it offers robust protection and an upgraded appearance on the front.
Features:
- Type: Stainless steel bumper bar
- Finish: Mirror polished
- Pipe diameter: 60mm
- Place: Lower bumper
- Included the installation set
Stainless Steel Bumper Bar Ø60mm Mercedes Atego 1/2
Original price was: 379,39 €.341,46 €Current price is: 341,46 €. excluding VATStainless Steel Bumper Bar Ø60mm Mercedes Atego 1/2
The 60mm diameter stainless steel bumper bar is an accessory for aesthetic upgrade and protection for Mercedes Atego 1 and Atego 2 trucks.
Features:
- Type: Bumper Bar — Front Bumper Bar
- Material: Stainless Steel — Inox
- Pipe diameter: Ø 60 mm
- Finish: Glossy (Mirror Polished)
- Mounting kit: Included
- Resistance: Resistant to rust, corrosion and weather conditions
- Place: Direct fit, no modifications
Stainless Steel Hood Trim Mercedes Atego 2
29,17 € excluding VATStainless Steel Hood Trim Mercedes Atego 2
Stainless steel trim on the upper part of the Mercedes Atego 2 truck hood, highlighting the line above the louvre.
Features
- Type: Truck hood trim (upper)
- Place: Pressed, with double-sided adhesive tape
Mercedes Atego 2 Sunvisor brackets
62,75 € excluding VATMercedes Atego 2 Sunvisor brackets.
Features:
- Installation location: Sunvisor
- Material: ABS plastic
- Color: Black
- The set does not include screws.
Compatible with:
- Atego 2, 2004 –
Headlight Base Left (LH) Atego 1/2
14,20 € excluding VATHeadlight Base Left (LH) Atego 1/2, driver's
The headlight base is a supporting component for the front light for trucks. Mercedes-Benz Atego 1 and Atego 2. It is placed in the left side (LH) of the front part and is used for the correct positioning of the lantern.
Features:
- Type: Lantern base
- Side: Left (LH)
- Material: ABS plastic
- Position: Front of cabin
- Situation: Aftermarket
Headlight Base Right (RH) Atego 1/2
14,20 € excluding VATHeadlight Base Right (RH) Atego 1/2, passenger side
The headlight base is a supporting component for the front light for trucks. Mercedes-Benz Atego 1 and Atego 2. It is placed in the right side (RH) of the front part and is used for the correct positioning of the lantern.
Features:
- Type: Lantern base
- Side: Right (RH)
- Material: ABS plastic
- Position: Front of cabin
- Situation: Aftermarket
Mercedes Atego 2 visor
97,48 € excluding VATMercedes Atego 2 visor. Offers protection from the sun and improves the aesthetics of the vehicle.
Features:
- With cutout for auxiliary mirror.
- Material: ABS Plastic & Polypropylene
- Color: Black
Compatible with:
- Atego 2 2004 –
Truck Hood Logo Mercedes Atego 1/2
29,70 € excluding VATTruck Hood Logo Mercedes Atego 1/2
The hood letters are a decorative element for Mercedes-Benz Atego 1/2 trucks. They are fitted on the truck hood and display the model name.
Features:
- Type: Bonnet letters (emblem)
- Material: ABS plastic with nickel/chrome coating
- Color: Silver
- Installation location: Cabin hood
- Situation: New – Aftermarket
Coolant Expansion Tank Mercedes Atego 1/2
72,69 € excluding VATCoolant Expansion Tank Mercedes Atego 1/2
The expansion tank is part of the cooling system for trucks Mercedes-Benz Atego 1 and Atego 2. It is placed in the cooling circuit and is used to manage the expansion of the coolant during engine operation.
Features
- Type: Coolant expansion tank
- Material: Plastic
- Color: Translucent / white (per version)
- Installation location: Engine cooling system
- Situation: New – Aftermarket
Inner Cheek Left (LH) Atego 2
15,57 € excluding VATInner Cheek Left (LH) Atego 2, driver's
The inner side panel is part of the inner side of the truck cab. Mercedes-Benz Atego 2. It is placed in the left side (LH) and covers the inner point behind the outer cheek.
Features
- Type: Interior cabin sidewall
- Side: Left (LH)
- Material: Plastic
- Color: White / unpainted
- Installation location: Cabin interior
- Situation: New – Aftermarket
Inner Side Panel Right (RH) Atego 2
15,57 € excluding VATInner Side Panel Right (RH) Atego 2, passenger side
The inner side panel is part of the inner side of the truck cab. Mercedes-Benz Atego 2. It is placed in the right side (RH) and covers the inner point behind the outer cheek.
Features
- Type: Interior cabin sidewall
- Side: Right (RH)
- Material: Plastic
- Color: White / unpainted
- Installation location: Cabin interior
- Situation: New – Aftermarket
Left Turn Signal Dome (LH) Mercedes Atego 2
31,27 € excluding VATLeft (LH) Turn Signal Dome Mercedes Atego 2, driver's side
The flasher dome is part of the truck cabin Mercedes-Benz Atego 2. It is placed in the left side (LH) at the side turn signal point and acts as a base and cover for the area.
Features
- Type: Flash dome / flash base
- Side: Left (LH)
- Material: Plastic
- Color: Black / unpainted
- Installation location: Cabin side point (flasher)
- Situation: New – Aftermarket
Right Turn Signal Dome (RH) Mercedes Atego 2
31,27 € excluding VATRight (RH) Turn Signal Dome Mercedes Atego 2, passenger side
The flasher dome is part of the truck cabin Mercedes-Benz Atego 2. It is placed in the right side (RH) at the side turn signal point and acts as a base and cover for the area.
Features
- Type: Flash dome / flash base
- Side: Right (RH)
- Material: Plastic
- Color: Black / unpainted
- Installation location: Cabin side point (flasher)
- Situation: New – Aftermarket
Visor Mirror Atego 2 / AXOR 2
79,80 € excluding VATVisor Mirror Atego 2 / AXOR 2
The visor mirror is part of the visibility system for trucks Mercedes-Benz Atego 2 and Axor 2. It is placed at the front of the cabin, usually on the visor, and is used to monitor the area in front of the vehicle.
Features
- Type: Visor mirror
- Regulation: Manual (via arm)
- Material: Plastic housing / glass
- Color: Black
- Installation location: Front of the cabin (visor)
- Situation: New – Aftermarket
Mirror Front visor Mercedes Atego / Axor
92,17 € excluding VATFront Mirror Mercedes Atego / Axor
The front visor mirror is part of the visibility system for Mercedes-Benz Atego and Axor trucks. It is mounted at the front of the cab, on the visor, and is used to monitor the area in front of the vehicle.
Features:
- Type: Visor mirror (front)
- Material: Plastic housing / glass
- Color: Black
- Installation location: Front of the cabin (visor)
- Situation: New – Aftermarket
Mirror Large Left (LH) Mercedes Atego / Axor
67,75 € excluding VATMirror Large Left (LH) Mercedes Atego / Axor
The large cab mirror is a key visibility element for Mercedes-Benz Atego and Axor trucks. It is located on the left side of the cab and is used to monitor the side and rear area of the vehicle.
Features:
- Type: Cabin mirror (main)
- Side: Left (LH)
- Operation: Electric and heated
- Material: Plastic housing / glass
- Color: Black
- Installation location: Exterior cabin mirror
- Situation: New – Aftermarket
Mirror large Right (RH) Mercedes Atego/Axor
67,75 € excluding VATMirror large Right (RH) Mercedes Atego/Axor
The large cab mirror is a key visibility element for Mercedes-Benz Atego and Axor trucks. It is located on the right side of the cab and is used to monitor the side and rear area of the vehicle.
Features:
- Type: Cabin mirror (main)
- Side: Right (RH)
- Material: Plastic housing / glass
- Operation: Electric and heated
- Color: Black
- Installation location: Exterior cabin mirror
- Situation: New – Aftermarket
Small mirror Heated Atego 2 / Axor 2
48,79 € excluding VATSmall mirror Heated Atego 2 / Axor 2
The small cabin mirror is a visibility aid for Mercedes-Benz Atego 2 and Axor trucks. It is installed in the mirror system and is used to monitor areas with limited visibility.
Features:
- Type: Cabin mirror (auxiliary / wide angle)
- Material: Plastic housing / glass
- Heated
- Color: Black
- Installation location: Cabin mirror system
- Situation: New – Aftermarket
Door mirror Mercedes Actros/Atego/Axor
19,46 € excluding VATDoor mirror Mercedes Actros/Atego/Axor
Καθρέφτης Πόρτας Χειροκίνητος Mercedes Actros / Atego / Axor Καθρέφτης πόρτας χειροκίνητης ρύθμισης από πλαστικό ABS σε μαύρο χρώμα για φορτηγά Mercedes-Benz Actros, Atego και Axor.
Features:
- Type: Καθρέφτης πόρτας (Οπισθοπορείας)
- Regulation: Manual
- Material: ABS plastic
- Color: Black
- Situation: New – Aftermarket (OEM compatible)
Universal Door Mirror Mercedes Actros / Atego / Axor
22,27 € excluding VATUniversal Door Mirror Mercedes Actros / Atego / Axor
The door mirror is the auxiliary mirror fitted on the cab door of Mercedes Actros, Atego and Axor trucks.
Features:
- Type: Door Mirror — Door / Ramp Mirror
- Side: Universal (LH & RH)
- Heating: Yes — 24V
- Dimensions: 303 mm x 163 mm
- Place: Direct fit, no modifications
Mirror cover Mercedes Atego/Axor
3,45 € excluding VATMirror cover Mercedes Atego/Axor.
Features:
- Installation side: Left/Right
- Color: Black
- Material: ABS plastic
- Mirror mounting kit included
Door outer pillar cover (LH) Atego/Axor
29,96 € excluding VATWindshield pillar cover (LH) Atego/Axor, driver's
The windshield pillar cover is an external part of the cab for Mercedes-Benz Atego 2 and Axor trucks. It is placed on the left side (LH) of the windshield pillar and covers the corresponding point.
Features:
- Type: Windshield pillar cover
- Side: Left (LH)
- Material: Plastic
- Color: Black / unpainted
- Installation location: Windshield pillar (external)
- Situation: New – Aftermarket
Door outer pillar cover (RH) Atego/Axor
29,96 € excluding VATWindshield pillar cover (RH) Atego/Axor, passenger side
The windshield pillar cover is an external part of the cab for Mercedes-Benz Atego 2 and Axor trucks. It is placed on the right side (RH) of the windshield pillar and covers the corresponding point.
Features:
- Type: Windshield pillar cover
- Side: Right (RH)
- Material: Plastic
- Color: Black / unpainted
- Installation location: Windshield pillar (external)
- Situation: New – Aftermarket
Mirror arm cover (LH) Atego driver
4,36 € excluding VATMirror arm cover (LH) Atego driver
The mirror arm cover is an external part of the mirror system for Mercedes-Benz Atego trucks. It is installed on the left side (LH) and covers the mirror arm.
Features:
- Type: Mirror arm cover
- Side: Left (LH)
- Material: Plastic
- Color: Black
- Installation location: Mirror arm
- Situation: New – Aftermarket
Armrest cover (RH) Atego passenger side mirror
4,36 € excluding VATArmrest cover (RH) Atego passenger side mirror
The mirror arm cover is an external part of the mirror system for Mercedes-Benz Atego trucks. It is installed on the right side (RH) and covers the mirror arm.
Features:
- Type: Mirror arm cover
- Side: Right (RH)
- Material: Plastic
- Color: Black
- Installation location: Mirror arm
- Situation: New – Aftermarket
Battery Cover Mercedes Atego 1/Atego 2
34,74 € excluding VATBattery Cover Mercedes Atego 1/Atego 2
Plastic battery cover for Mercedes Atego 1 and Atego 2, pre-Euro 6 versions. Direct replacement for OEM 3755410103.
Features
- Type: Battery cover
- Material: Plastic
- Color: Black
- Place: Direct OEM replacement, no modifications
Battery Cover for Mercedes Atego 1/2
29,79 € excluding VATBattery Cover for Mercedes Atego 1/2
The battery cover is the outer cover of the battery compartment for Mercedes-Benz Atego 1 and Atego 2 trucks. It is placed in the corresponding area of the cabin and covers the vehicle's batteries.
Features:
- Type: Battery cover
- Material: Plastic
- Color: Gray
- Installation location: Cabin battery case
- Situation: New – Aftermarket
Fiberglass bonnet for Mercedes Atego 2
107,57 € excluding VATCab Hood Mercedes Atego 2
The cab hood is a key exterior part for Mercedes-Benz Atego 2 trucks. It is installed at the front of the cab and covers the engine area.
Features:
- Type: Cabin hood
- Material: Fiberglass
- Color: White, Unpainted
- Installation location: Front of cabin
- Situation: New – Aftermarket
- Dimensions:
- Length (cm): 200cm
- Width (cm): 31cm
- Height (cm): 4cm
Atego Cabin Release Lock
9,78 € excluding VATAtego Cabin Release Lock
The cabin release latch with OEM code 9703100173 is a key component of the mechanism locking and unlocking the cabin in trucks Mercedes-Benz Atego. The component participates in the cabin locking system on the vehicle frame and is activated during the process of lifting the cabin to access the engine.
Features:
- Type: Cabin lock/unlock mechanism
- Material: High-strength metal construction
- Installation location: Cabin locking system on the frame
- Operation: Unlocking and holding the cabin during lifting
- Situation: New – Aftermarket OEM type
